Every time you pay your water bill, do you feel appreciate you’re flushing your hard- gained money down the drain? You might be doing just that, the number 1 cause of rising water bills is a leaky toilet, but water can be wasted up to a gallon per day by a faulty toilet, and in total, that has over 30 gallons of wasted water a month or 360 gallons a year.
That’s a lot of water wasted! What’s the most common culprit when it comes to water-wasting toilets? It is a small, plug-like unit called a “toilet flapper.” What exactly is a toilet flapper? This rubber unit sits at the bottom of the toilet tank as well as is linked to the tank lever by a chain.
When flushing the toilet, the toilet flapper ensures there is enough water in the tank to flush the toilet, however even though the flapper is not a sophisticated device, it’s an essential section of your toilet’s operation. The inner workings of your toilet are easy if you have ever flushed it manually. When you flush, the flush lever pulls the chain, lifts the flapper, as well as releases the water from the tank, however following the draining of water from the tank, the float ball drops as well as activates a fill valve, which triggers the flow of current water. This easy process gets interrupted if the flapper is destructiond, frayed, broken or faulty. If the flapper doesn’t make a correct seal, water will continue to leak from the tank, forcing the float ball to drop, which activates the fill valve. In the event of a faulty flapper, your toilet tank will repeatedly empty as well as fill, then over the course of days or weeks, this constant filling as well as refilling of the tank can waste a lot of water as well as money.